Industry · Machinery

Zero assembly errors,micron-level part accuracy

AI vision for high-value machinery production: part and assembly inspection, overhead crane safety and cycle time analysis.

Machinery, industrial equipment and subsystem manufacturing is a precision engineering field where hundreds of machined parts, hydraulic/pneumatic lines, bearings, bolts and electrical groups come together. A single mis-torqued bolt, a missing washer, a reversed valve or a shaft with micron-level misalignment can lock up the machine at the factory acceptance test (FAT), trigger costly rework or cause major reputational damage under warranty in the field.

Assembly · step 6/9Team · PPE ✓CAM-37 · LIVE
Machinery and Equipment Manufacturing3 modules
  • Quality Control6 scenarios
  • Occupational Health & Safety6 scenarios
  • Operational Efficiency6 scenarios
Challenges

What makes this sector hard to watch.

Production here is measured not in seconds but in hours and days, at complex workstations where crane waits, searching for parts and unbalanced workloads quietly stretch lead times by weeks. MonitEye turns your existing cameras into an AI inspector, safety supervisor and process engineer on the shop floor.

Assembly errors caught only at FAT or in the field
Machining tolerance deviations
Suspended loads and overhead crane risks
Rotating spindles and machine tool hazards
Hidden waits for parts, drawings and cranes
Lead times running weeks over target
Solutions

MonitEye modules for this sector.

Each module runs on the cameras you already have and is tuned to the sector's own risks, defects and processes.

Ø 24.98 mm ✓Tool wear · 0.8801 · Quality Control
Quality Control

Quality Control

Zero assembly errors and micron-level part accuracy in high-value manufacturing

The MonitEye Quality Control Module combines high-resolution industrial cameras, angled optical LED systems that light part geometry without glare, and deep learning models working with CAD references. It inspects every step in real time, from machined parts to chassis assembly, catching faulty assembly and machining defects instantly.

Explore the module
Machined Part Geometry Inspection

Compares hole diameters, hole center distances, chamfer angles, groove widths and thread pitches on housings, flanges, shafts and gears with CAD models, detecting tolerance deviations to a hundredth of a millimeter.

Step-by-Step Assembly Verification

Checks that the operator fits the right component in the right order. Wrong part selection, a missing O-ring, a reversed gasket, a missing circlip or a skipped step triggers an on-screen alert.

Bolt, Nut and Fastener Inspection

Optically confirms missing screws or bolts, wrong fastener types and the presence of torque indicator paint marks on housing and flange joints.

Weld Seam and Chassis Integrity

Scans robotic and semi-automatic welds for seam continuity, spatter, undercut, porosity and cracks, and flags geometric chassis distortion.

Paint, Coating and Surface Defects

Inspects cast and welded bodies before assembly for paint runs, orange peel, blasting residue, scratches, rust spots and label/plate placement.

Barcode, QR and DPM Serial Reading

Reads laser or dot-peen direct part marking (DPM) codes on metal parts even in harsh lighting, and logs each part to the assembly record and ERP.

Welder · PPE ✓Arc · Active02 · Occupational Health & Safety
Occupational Health & Safety

HSE and Site Safety

Proactive protection around overhead cranes, heavy part transfers and rotating lathe chucks

Suspended steel parts, walking under cranes, gloves or clothing caught in rotating spindles and forklift blind spots are the most common sources of limb loss and fatal accidents in machinery manufacturing. MonitEye turns standard security cameras into an AI site supervisor, detecting dynamic hazard zones, suspended loads, missing PPE and risky behavior, and triggering audible/visual beacons and machine safety relays.

Explore the module
Overhead Crane and Suspended Load Zone

Draws a dynamic virtual hazard circle on the load's projection while the crane carries a heavy chassis. Anyone under the load or in the approach zone triggers directional audible alarms and overhead beacons.

Machine Tool Zone Violations

Raises an instant alarm when someone approaches a rotating spindle without a guard or intervenes improperly on lathes, mills and radial drills, preventing accidents before they happen.

Welding and Grinding Cell PPE

Continuously checks auto-darkening welding helmets/visors, fire-resistant leather aprons and sleeves, dust masks and steel-toe shoes.

Robotic Cell and Laser/Plasma Cutting Protection

Monitors the optical safety barriers of laser, plasma and robotic welding cabins and sends an emergency stop signal to the robot on unauthorized entry.

Forklift and Pedestrian Separation

Tracks safe distances between forklifts, electric pallet trucks and technicians in narrow aisles and receiving areas, warning both driver and pedestrian at once.

Emergency Exits and Panel Safety

Detects chip bins, castings or pallets blocking electrical panels, fire extinguishers and escape routes, and notifies supervisors.

Spindle · runningPart · OK 0.9903 · Operational Efficiency
Operational Efficiency

Operational Efficiency and Process Analysis

Eliminate station waits, optimize cycle times and resolve production bottlenecks

Management often blames delays on the final assembly stage, but the real loss is hidden in hundreds of micro-waits spread through the process. MonitEye turns shop-floor cameras into AI process engineers, tracking every step from part preparation, welding and machining to final assembly and hydraulic testing, and presenting hidden stoppages, operator motion losses and station bottlenecks with hard data.

Explore the module
Assembly Cycle Time and Stage Tracking

Monitors each sub-assembly step (chassis assembly, motor coupling, hydraulic unit connection, etc.) against its standard operating time and flags overruns instantly.

Station Waits and Idle Causes

Separates time spent waiting for parts, drawings or the crane from active work and lists root causes of stoppages by frequency.

Overhead Crane and Material Logistics

Analyzes active lifting, empty travel and idle times of cranes and maps capacity lost to stations queuing for the crane.

Fixture Change and Setup Times (SMED)

Measures clamping, zeroing, tool change and unloading times on large gantry mills, CNC boring machines and welding robots to shorten setups.

Workforce Balancing and Line Flow

Compares technicians' active workload across stations, exposing imbalances where one station piles up while another waits.

Live Production Stage Monitoring

Feeds how long each made-to-order machine has spent in each assembly phase into ERP and MES automatically, giving early warning of delivery delays.

Case studies

Results from the field.

Real projects in this sector: the problem, what MonitEye did and the numbers before and after.

Case study · Quality Control

Heavy Machinery and Gearbox Manufacturer

A factory producing industrial gearboxes relied on the human eye and manual checklists on its assembly line. An average of 14 gearboxes a month were assembled with a missing shim, wrong bearing series or missing bolts, errors that surfaced only at the final load test (FAT) or during field commissioning. This meant full disassembly, days of bottlenecks at the test station and serious warranty costs.

  • 6 high-resolution industrial cameras with diffuse LED panels were integrated into the main gearbox assembly cell and sub-assembly benches.
  • The AI model was trained with CAD drawings and the part library to verify assembly steps one by one.
  • Correct placements received a green confirmation on the operator screen; a wrong shim or missing circlip blocked the torque wrench and press from moving to the next step at PLC level.
MetricBeforeAfterChange
Faulty assemblies reaching the test station (FAT)Avg. 14 cases per monthZero defects100% success
Disassembly/rework cost from faulty assembly~€18,500 per month€0Full savings
Assembly verification time8 min with manual formInstant AI verification90% time savings
Customer field warranty returns6 cases per year0 cases (1-year follow-up)Flawless quality standard
Case study · Occupational Health & Safety

Heavy Industrial Equipment and Chassis Plant

At a 450-employee plant producing crusher and mill bodies for the mining and cement sectors, welded structures of 15–40 tons were moved between halls by overhead cranes. Personnel were found passing directly under the load or failing to keep a safe distance while it was turned an average of 22 times a month. In the machining hall, operators standing dangerously close to moving machine parts and grinding without eye protection regularly appeared in near-miss reports.

  • 32 ceiling cameras in the main production halls were connected to the MonitEye HSE video analytics platform, with virtual projection algorithms tracking crane hook movement.
  • A 3-meter "Dynamic Blind Zone" was defined around the load during lifts; a pedestrian entering it triggered a hook-mounted siren and a blue floor projection.
  • On the lathe-mill line, leaning into the machine with the guard open and improper handling of rotating tools where gloves must not be worn were flagged instantly by AI.
MetricBeforeAfterChange
Presence under suspended load violationsAvg. 18 cases per dayZero cases100% compliance
Crane and heavy load near misses11 critical cases per year0 cases (loss-free period)Full safety
Eye/face protection compliance64%99.2%+35.2 point increase
HSE monitoring and alert timeManual periodic checks24/7 continuous real timeInstant response
Case study · Operational Efficiency

Packaging and Filling Machine Manufacturer

At a factory building made-to-order automatic packaging and bottling lines, average machine lead time had risen from the targeted 8 weeks to 11–12 weeks. Investigation showed assembly technicians spent over 30% of their time searching for missing parts, waiting for rework from the grinding room or waiting for the overhead crane, pushing assembly steps 45% over plan. Yet which stage was delayed and by how much could not be tracked manually.

  • 16 high-frame-rate MonitEye process analysis cameras were installed covering 10 main assembly stations and the tool room/preparation area.
  • The AI model was configured to automatically distinguish mechanical assembly, electrical wiring, pneumatic assembly and test phases from operators' motion patterns and tool use.
  • Material waits or idle periods over 15 minutes at a station triggered instant task notifications to the line leader and logistics lead.
MetricBeforeAfterChange
Assembly cycle time per stationAvg. 48 hoursAvg. 31 hours35.4% time savings
Material/crane waiting losses32% of daily shift7% of daily shift78.1% reduction
Machine lead time11.5 weeks7.8 weeks32.1% faster
Annual machine production capacity52 machines / year71 machines / year+36.5% capacity increase

From machined parts to final assembly, MonitEye catches errors before FAT, protects your people around cranes and machine tools, and cuts hidden waits from your lead times. Talk to us about a pilot on your shop floor.

Pick a camera and a scenario. We analyse your footage and show you the value MonitEye creates, before you commit to anything.